Thin coats and tape


 Here's an example of doing a thin coat and placing tape.  In this case the thin coat lets the whit eprimer show through.  This is the shaft of an arrow and I want it to look like wood. The tape is reused from another project but with 10 pressure rolls with the walpaper seam roller it will seal just fine. 

Comments

Post a Comment

Popular posts from this blog

Links to design selections for classes

Image
  Happy Day! You can pick from any of the designs on the links below, or choose something from Etsy or Pintrest.  I will let you know if you choose something that is too difficult.  Then email or text a copy of the design you want to do. Thanks,  Jeff - 717-620-9676   Jeff@kurtzinpa.com Color Charts:  <<< My general selection group: <<< Civil War and Underground Railroad  era patterns: <<< Art that has been done in recent classes: <<< Happy painting!
Read more

Jeff's tips for painting barn quilts

  Tips for better painting:                                                                     Jeff Kurtz   8/14/22  Paint can start to dry (skin over) in as little as 8 seconds.  If you feel your brush start to “drag” when painting over a previous stroke, you should stop, put more paint on the brush, and move to an adjacent area to continue painting.  Brushing over a “skinned” area can leave deep brush marks.  Once the design is laid out, start by erasing the lines before you apply tape.  Pencil marks can bleed and show through several layers of paint. Special tip!  This helps avoid paint bleeding under the tape.  Use a thin coat of clear finish to coat the edges of new tape areas.  Bleeds are practically eliminated.  Seem like an extra step?  Thank me later… Let a thin line of the paint you are taping over show before pressing the tape into place. This helps eliminate thin unpainted strips from occurring. Use thin coats of paint!  You will get uniform coverage without paint layer be
Read more